Store Details

Digital Thermostat Controller, 230 V, XH-W3001, 12/24/220V, 60 x 45 x 32 mm

Description:

The module can control heating or cooling by setting a start temperature and an off temperature.
The product connects to relays or very small consumers; for larger consumers, it will malfunction. Connect to a consumer with caution!
The thermostat can be programmed to control 2 types of temperature control devices, namely for cooling (e.g., a fan) or for heating (e.g., a heating element).

If the value indicated by pressing the left button is lower than the value indicated by pressing the right button, the thermostat is programmed to control a heating device:

• The voltage is turned on when the temperature drops below the value set by the left button.
• The voltage is turned off when the temperature rises above the value set by the right button.

If the value indicated by pressing the left button is higher than the value indicated by pressing the right button, the thermostat is programmed to control a cooling device:

• The voltage is turned off when the temperature drops below the value set by the right button.
• The voltage is turned on when the temperature rises above the value set by the left button.

To set a temperature, press and hold one of the buttons until the display starts blinking.
While the display is blinking, the temperature can be adjusted up and down in small increments of 0.1 degrees, or more quickly if the up/down button is held continuously.
Once the temperature is set, the display will stop blinking, and after a short period, it will return to showing the actual temperature.
By holding both buttons, a short test of the display will occur, and then it will return to the factory set temperatures.
Any changes to the temperature are stored in non-volatile memory and will be retained even if the device is turned off.